Posted 20 hours ago

Pioneer TS-WX130DA Space Saving Active Subwoofer with Built-In Class-D Amplifier (160w)

ZTS2023's avatar
Shared by
Joined in 2023

About this deal

Despite having the depth in bass, you will also notice there is no lag or delay coming from the subwoofer bass. While driving keep your listening volume at a level which does not mask important outside traffic noises. such as emergency vehicles. etc. As well as testing and our experience, we also based our recommendations upon plenty of research and a number of factors. Some of the factors that we took into consideration included their performance (peak power and RMS), size, construction, remote control, supplied hardware, warranty and value for money. Conclusion

The GAIN control circuit protects the subwoofer from excessive input and may automatically adjust the level to prevent damage. After adequately fitting, there was minimal to no distortion, even driving the subwoofer at its limit. Also, the robust build quality, void of any visible seams or gaps, adds to its polished aesthetics. From the front view, you will see the woofer is covered in a metal mesh speaker grill to protect it from other harmful materials. Please ensure you leave enough cable spare at the connector side for flexible and safe installation. to avoid damage to the remote control cable. Correctly set the input level switch to match the outputs of your car stereo. If this is not correct. you may experience distortion and sound level may not increase.

However, this underseat subwoofer really hit hard for its size. But some advanced audiophiles who like to listen to dual big-sized subwoofers won’t find it any beneficial for their music taste. 1. Depth and Resonance: Deep Mode: I found this mode ideal for genres like jazz, classical, or any music that emphasizes richer and deeper bass notes. It provides a more resonant and profound bass response. In the end, I found 95dB sensitivity more effective in terms of getting impressively loud sound and maximizing efficiency. 2. Compact Design: Wiring Harness:We will also have a complete set of wires required for installation, including power, ground, and input cables.

The internal Low Pass Filter (LPF) is not set when the remote-controller is disconnected. When remote-controller is disconnected. please set the LPF from your car stereo. For more information. refer to your car stereo manual. Honestly, the frequency range is good in this price range. The subwoofer can even provide you with deep bass sound, or you can also use the woofer with more vibrant mids. Please do not disconnect the remote-controller if using the speaker level input. The remote-controller is necessary to control the level and LPF.

Optical Drives

Now let’s talk about power output. The Pioneer TS-WX130DA compact active subwoofer is a powerhouse, delivering 160 watts of max power. Specifications and the design are subject to possible modification without notice due to improvements. Although I have mentioned things in the specs section, I will go more in detail here. You will get an integrated class D amplifier with a peak power rating of 160 watts, which is exact to the subwoofer itself (no more, no less). Do not leave this remote-control in direct sunshine or at a hot place for a long time. Prolonged exposure may cause the unit to deform. change in color. or become faulty. If you are a hardcore bass lover who wants to annoy the neighbors with his bass output, this subwoofer won’t work for you. However, you will enjoy the sound production in the car. 3. No Distortion:

If speaker line input wires from a headunit are connected to this amplifier. the amplifier will automatically tum on when the headunit is tumed on. When the headunit is turned off. the amplifier turns off automatically. This function may not work with some headunit. In such cases. please use a system remote control wire and connected to the accessory connector in the car's fuse unit from which over 2 A can be supplied. At first, when I tried the subwoofer without mounting it properly under the passenger seat of the Honda Accord, it made a distorted sound. By doing so you will ensure that your disposed product undergoes the necessary treatment. recovery and recycling and thus prevent potential negative effects on the environment and human health. FINAL STEP OF THE INSTALLATION Finish the installation by reconnecting the vehicle's negative (—) battery lead. HOW TO INSTALL No subwoofer control setting changes are possible with the remote-controller disconnected. Some car stereo provide specific subwoofer controls. Please refer to your car stereo manual for more information.

Product Research

In terms of the installations of both, they were relatively straightforward but each time, we removed the car’s seat. However, it’s worth pointing out that this isn’t always necessary but it does make the installation go far more smoothly. With regards to the JBL BassPro Nano installation, the space we had available was minimal but thanks to the ultra-compact design, it fitted perfectly and it made a huge difference to the bass in the car. Connection to the Audio:Connect the active subwoofer to your car’s stereo using RCA cables (RCA input harness). Use the high-level input connectors on the subwoofer if your stereo doesn’t have RCA outputs. You can also use the speaker-level input if you don’t have a preamp or receiver. Frequency Response Range After going through different experiments, I must say that the Pioneer TS WX130DA delivers excellent value for money, considering its rich feature set and stellar performance.

NOR : When using the RCA input with a standard preouts car stereo or when using the speaker level input. The Pioneer TS-WX130DA definitely doesn’t disappoint when it comes to bass performance. This subwoofer hits high notes hard and low to extremely low, and what’s impressive is that it doesn’t sacrifice quality for quantity.Remote Control Connection: Now, connect the wired remote control to the designated location of the subwoofer wiring harness. Run the wire to the front of the car and place the remote in a convenient location. Running the Power Cable:Now, you need to run one end of the red power wire from the subwoofer location to the car’s battery (positive terminal). This subwoofer requires less power, so that you can use 8AWG or 10AWG. However, I have also tried it with a 20-gauge wire. Its compact design ensures versatile placement options within your vehicle, creating an immersive audio experience without compromising space. The brand’s reputation for quality further underscores its value. This is a plus point for Pioneer as they reduced the building cost here. But usually, I recommend an internal amplifier to have a little bit more peak power handling than a subwoofer for some protective measures. The active subwoofer comes with a remote bass control, which provides a gain knob (mix – max), frequency knob (25Hz to 125Hz), phase switch, and bass button.

Asda Great Deal

Free UK shipping. 15 day free returns.
Community Updates
*So you can easily identify outgoing links on our site, we've marked them with an "*" symbol. Links on our site are monetised, but this never affects which deals get posted. Find more info in our FAQs and About Us page.
New Comment